How to Apply Suction Sticker to Stokke Tripp Trapp Tray
Applying your Brightberry Suction Sticker properly makes all the difference. A clean tray, the right placement method, and a few minutes of smoothing will help the sticker bond securely and create the smooth surface your suction bowl or plate needs.
This guide walks you through both recommended application methods: the water method for plastic trays, and the masking tape method for smaller areas or wooden surfaces.
Why Suction Doesn't Stick to the Stokke Tripp Trapp Tray
If you've ever wondered, "do suction bowls work on the Stokke Tripp Trapp?", the answer is not directly. The tray's textured surface stops suction bases from sealing properly. Even high-quality suction bowls can slide, lift, or lose grip because air escapes through the texture before the seal can form. Our tips to make your suction bowls stick cover this in more depth.
The Brightberry Solution
That's where the Brightberry Suction Sticker comes in. It creates a smooth surface on the Stokke Tripp Trapp tray, giving suction bowls and plates the base they need to hold properly.
It's designed to work as part of the full Brightberry suction system: sticker underneath, then your Brightberry bowl, plate, or silicone placemat on top.
The application process is straightforward.
For the strongest hold, pair your suction sticker with Brightberry Suction Bowls and Easy-Scooping Plates. They're designed to work together as a system, and it's the only combination we can guarantee will perform. The sticker may work with other brands of tableware too, but we can't guarantee the same result outside the Brightberry system.
How to Apply the Brightberry Tray Sticker
1. Thoroughly Clean the Surface
The most important step for a successful application is starting with a completely clean tray. Make sure it's free of soap, oil, or food residue, as any of these can stop the sticker from adhering properly.
Clean the tray with warm, soapy water, then rinse well so no soap or residue is left behind.
Avoid window-cleaning products. These can leave a residue that stops the sticker from bonding correctly.
2. Wipe the Tray with the Included Alcohol Pad
Use the alcohol pad included in your pack to wipe the tray surface, then let it dry completely before moving on. Any alcohol left on the surface will affect adhesion.
Once the tray is clean and the alcohol has fully dried, you're ready to apply the sticker. Choose one of the two methods below.
Two Methods for Applying the Sticker
Method 1: The Water Method
Recommended for plastic surfaces, since it lets you reposition the sticker before it sets.
After cleaning the tray:
- Wet the tray with water.
- Place the sticker onto the wet area.
- Position it, or reposition if needed.
- Push the water and any air bubbles out from the centre using the sticker applicator tool or a plastic card wrapped in a soft cloth.
- Remove the excess water with a soft cloth.
- Optional: warm up the sticker with a hairdryer for a strong bond. It needs real warmth, not just gentle heat, to help it set properly. Then smooth it again.
The water method helps remove air bubbles, and once the water dries, the sticker stays firmly in place. We recommend watching the video above to see this method in action.
Method 2: The Masking Tape Method
Better suited to smaller areas or wooden surfaces.
After cleaning the tray:
- Position the sticker with the backing paper still on, and check it's properly aligned.
- Use masking tape to secure one side, creating a hinge.
- Lift the untaped side and peel the backing paper halfway.
- Cut away the exposed backing paper.
- Slowly lower the sticker onto the surface.
- Smooth the sticker down from the centre toward the edges, slowly, using the sticker applicator tool or a plastic card wrapped in a soft cloth.
- Continue peeling and smoothing until the sticker is fully applied.
Common Questions
How do I clean the suction sticker?
Wipe with a soft sponge, mild detergent, and water. Rinse thoroughly. Don't put it in the dishwasher, and avoid abrasive sponges or harsh chemicals.
How long does the suction sticker last?
This is a one-time application; it's not designed to be peeled off and reapplied elsewhere. Once it's properly applied, it's built to stay in place long-term (a few months at least). How long it lasts depends on how it's applied, cleaned, and used day to day. Many families keep a spare on hand by purchasing a 2-pack.
Can I remove the suction sticker?
Yes. Lift a corner and peel it back slowly. Watch the removal video before taking it off.
Can I use a silicone placemat on top of the suction sticker?
Yes. The Brightberry Silicone Placemat sits directly on top of the sticker and extends a clean, food-safe surface across the whole tray. Brightberry suction bowls and plates then hold reliably on top of the placemat. It's the combination most Stokke families end up with.
Will the suction sticker work with other brands of bowls?
The suction sticker may work with other brands, but we can only guarantee performance with Brightberry suction bowls and plates, since they're designed to work together as one system.
Does the suction sticker work on wooden surfaces or tables?
Yes, the sticker can work on wooden surfaces, but removing it may affect the finish. The sticker is tested for plastic surfaces, so if you choose to use it on wood, test a small, hidden area first and be aware we can't take responsibility for any damage to the surface.
Additional Resources
Visit our YouTube channel for more videos on cleaning around the sticker and removing it when needed.
Complete Your Stokke Tripp Trapp Setup
Once your suction sticker is in place, here's what most Stokke families add next. Everything is designed to work together as a system.
Suction stickers are available for Stokke Tripp Trapp, Bugaboo Giraffe, Stokke Clikk, Redsbaby Hilo2, and universal round and rectangular options.
You can also browse the Stokke Tripp Trapp collection for the complete mealtime setup.
The most important step is cleaning the tray thoroughly and letting the alcohol pad dry completely before applying the sticker. Any soap, oil, or residue left behind will affect adhesion and performance.
