How to Apply Suction Sticker to Stokke Tripp Trapp Tray
As parents ourselves, we know how frustrating mealtime can get. You've invested in a beautiful high chair, chosen quality suction tableware, and then your baby's bowl slides across the tray anyway. Before you know it, dinner is on the floor, and your little one thinks it's hilarious.
If you have a Stokke Tripp Trapp, this isn't your fault, and it isn't the bowl's fault (at least not always). The tray's textured surface prevents suction from forming a proper seal, and the fix is simpler than you'd think.
This guide walks you through exactly how to apply the Brightberry Suction Sticker so it works the way it should, the first time.
The Struggle with Stokke Tripp Trapp Tray
If you're a parent wondering, "Do suction bowls work with Stokke Tripp Trapp?" you're likely familiar with this issue. The tray's textured surface makes it challenging for suction tableware to stay firmly in place. Following tips to make your suction bowls stick can help improve stability and keep your child's meals from sliding around.
The Brightberry Solution
At Brightberry, we understand these mealtime struggles. To help, we've developed a unique solution: the Brightberry tray sticker.
Brightberry stickers are made from specially designed material that creates a smooth, airtight surface on the tray. This ensures a non-slip surface on the tray, helping to keep your child's suction bowls and plates firmly in place.
The application process is straightforward.
To ensure the best results, we recommend using our Brightberry suction bowls and easy scooping plates in combination with our tray sticker. They're designed to work together as a system to keep your child's dish securely in place on the tray.
For the strongest hold, pair your sticker with Brightberry suction bowls and plates. They're designed to work together as a system, and it's the combination we guarantee will work. While the sticker can improve suction on other brands, we can only guarantee performance with Brightberry tableware.
How to Apply the Brightberry Tray Sticker
Thoroughly Clean the Surface
The most crucial step for a successful sticker application is starting with an impeccably clean tray. Ensure your tray is clean and free of soap, oil, or food residue, as these can interfere with the sticker's adhesion.
Wipe with the Included Alcohol Pad
Use the alcohol cleaning pad included in your pack to wipe the tray surface. Allow it to dry completely before moving to the next step. Any alcohol residue remaining on the surface will affect adhesion.
Washing the Tray
Clean the tray with warm, soapy water or rubbing alcohol and water. After cleaning, rinse it well to ensure no soap or residue remains on the surface.
Avoid Window-Cleaning Products
These products might leave a residue that could prevent your sticker from adhering correctly.
Once the tray is clean and the alcohol has fully dried, you're ready to apply the sticker. Consider these two recommended methods for best results.
Methods for Applying the Sticker
Method 1: Use Water (recommended for plastic surfaces — enables repositioning)
After cleaning the tray/surface area:
- Wet the area with water.
- Place the sticker over the water. This allows you some time to reposition it if needed.
- After positioning the sticker, press out excess water from the centre using a soft cloth, working from the centre towards the edges. Take your time and push out as much water as possible. Press firmly on the edges.
- Smooth out any remaining air or water bubbles with our sticker applicator tool (or a plastic card wrapped in a soft cloth), working from the centre towards the edges.
- (Optional) To further secure the sticker, warm it up with a hairdryer for a few minutes, then repeat the smoothing step.
Using the water method removes any air bubbles, and the water will soon dry, leaving your sticker firmly in place. We highly recommend watching the video tutorial above to understand this method better.
Method 2: Using Masking Tape (for smaller areas or wooden surfaces)
After cleaning the tray/surface area:
- Position the sticker where you want it to go, keeping the backing paper on. Ensure it's properly aligned.
- Use masking tape to secure one side of the sticker. This prevents it from moving.
- Lift the untaped side of the sticker, peel off the backing paper up to the middle (and cut off this part of the backing paper), and slowly lower the sticker onto the surface, ensuring it stays in the correct position. Then, using a plastic card wrapped in a soft cloth, smooth it out from the centre towards the edges, ensuring no air bubbles are formed.
Common Questions
How do I clean the sticker?
Wipe with a soft sponge, mild detergent, and water. Rinse thoroughly under running water. Do not put in the dishwasher and avoid abrasive sponges or harsh chemicals.
How long does it last?
The sticker is a single-use adhesive designed for long-term use. Lifespan depends on how it is applied, cleaned, and used. Many families purchase a 2-pack so a replacement is always ready.
Can I remove it?
Yes. Peel the edge using tweezers or your nails and slowly peel back. Watch the removal video here.
Can I use a silicone placemat on top of the sticker?
Yes. The Brightberry Silicone Placemat sits directly on top of the sticker and extends a clean, food-safe surface across the whole tray. Brightberry suction bowls and plates then lock in reliably on top of the placemat. It's the combination most Stokke families end up with.
Will it work with other brands of bowls?
The sticker can improve suction with other brands, but we can only guarantee performance with Brightberry suction bowls and plates, which are designed to work together as a system.
Does it work on wooden surfaces or tables?
It can improve suction on wooden surfaces, but removal may cause damage to the finish. Test a small inconspicuous area first before full application.
Additional Resources
Please visit our YouTube channel for more instructional videos on cleaning the tray with the sticker applied and removing it when needed.
Complete Your Stokke Tripp Trapp Setup
Once your sticker is in place, here's what most Stokke families add next. Everything is designed to work together as a system.
Pair your suction sticker with Brightberry suction bowls and easy-scooping plates for the complete Stokke Tripp Trapp mealtime setup. Everything is designed to work together, and it's the combination we guarantee will work.
Available for Stokke Tripp Trapp, Bugaboo Giraffe, Stokke Clikk, Redsbaby Hilo2, and universal round and rectangular options.
You can also browse our Stokke Tripp Trapp collection for the complete mealtime setup.
For best results, follow the application steps carefully. Cleaning the tray thoroughly and allowing the alcohol pad to dry completely before applying the sticker is the most important step. Any soap, oil, or residue will affect adhesion and performance.
