Mar 13, 2026

Why Nothing Sticks to the Stokke Tripp Trapp Tray and How to Fix It

If you've just brought home a Stokke Tripp Trapp, you've probably discovered something frustrating pretty quickly: suction bowls and plates just don't stick to the tray.

You press down, the bowl seems to hold, and then... off it goes. Across the tray, onto the floor, or launched by a very pleased 10-month-old.

You're not doing anything wrong. The tray itself is the problem. And there's a simple fix.

Why Nothing Suctions to the Tripp Trapp Tray

The Stokke Tripp Trapp tray has a textured, matte surface. Those tiny bumps let air sneak under the suction base before a seal can form.

It doesn't matter how good the suction bowl is. If the tray surface isn't smooth, suction simply won't hold.

This is one of the most common frustrations for Tripp Trapp parents, and it's why so many end up Googling "why won't anything stick to my Stokke tray."

The Original Solution: The Brightberry Suction Sticker

At Brightberry, we designed a special suction sticker specifically for this tray — the original solution to this problem, developed by parents and industrial designers who experienced this frustration firsthand.

The suction sticker applies directly to your Tripp Trapp tray and creates the smooth surface suction bowls need to grip properly. It stays flat, cleans easily, and holds up to daily mealtime use.

For the strongest hold, pair it with Brightberry's theOne™ Suction Bowl. The bowl is designed to work with the sticker as a complete system, and it's the combination we guarantee will work.

"My partner tested it by lifting from the bowl and the tray came clean off the highchair — but the bowl did not budge." — Vivienne H.

The Original Suction Solver for the Stokke Tripp Trapp

When Brightberry set out to solve the suction problem on the Tripp Trapp tray, the answer wasn't obvious.

The Brightberry Suction Sticker is made from a specific high-quality material that creates a truly smooth, airtight surface so suction bowls actually grip. It's the original suction solver designed specifically for this tray, and the one thousands of parents trust.

What's Included with the Susction Sticker Pack

Each Brightberry Suction Sticker pack includes:

The suction sticker, measuring 37 × 17.5 cm — a perfect fit for the Tripp Trapp tray (available as single, 2-pack, or 6-pack)
Cleaning pad/s
Application instructions

The 2-pack (35% off) is our most popular option. Many parents keep a spare for grandparents' house or daycare. A 6-pack (45% off) is available for families with multiple chairs, or to share with friends and save on shipping.

How to Apply It

Takes just a few minutes. You'll need the included cleaning pad and, optionally the applicator tool for the best bubble-free finish.

Clean your tray thoroughly with soap and water, and let it dry completely
Wipe with the included cleaning pad to remove any remaining oils. Let it dry fully
Wet the tray surface (the water method helps with positioning)
Peel back the sticker and apply it over the water to the tray
Smooth out any bubbles from the middle outward
Dry it off. Mealtime ready

There's also a step-by-step video on the Brightberry YouTube channel if you prefer to follow along visually.

One thing worth knowing: the suction sticker is a single-use adhesive. Once removed, it won't reapply reliably, so it's worth taking your time during application to get it right the first time.

How to Keep It Clean

Cleaning is easy, just wipe it down with a soft sponge, mild soap, and water. You can also remove the tray and rinse it under warm running water. Avoid the dishwasher, as the heat can cause it to peel.

With proper care, it holds up well for months of daily use.

"I love the item! It does not come off and even if I wash it under the running tap to clean the tray it does not create any air bubbles or disrupt the sticker." — Jane Y.

What Works Best With It

The suction sticker works with most well-designed suction tableware, but it's guaranteed to work with Brightberry's own bowls and plates.

theOne™ Suction Bowl Set — ergonomic design, strong suction base, and two matching spoons. Designed for babies learning to self-feed from around 6 months.

theBase™ Easy Scooping Plate — inward-curved walls help toddlers scoop food independently. Sized to fit the Tripp Trapp tray.

Silicone Placemat — if you're doing baby-led weaning and want to serve food directly on the tray, the placemat sits on top of the sticker and creates a 100% food-safe surface.

All three are designed to work together as a complete mealtime system for the Tripp Trapp.

New to solids? Read our guide: Starting Solids: A Guide to Baby-Led Weaning & Purees

👉 Shop the complete Tripp Trapp setup here

Does It Fit Other Stokke Chairs?

The Tripp Trapp sticker is cut specifically for the Tripp Trapp tray. Here's how it works across other Stokke models:

Stokke Nomi — the Nomi tray is slightly larger, but the Tripp Trapp sticker fits well
Stokke Clikk — a separate Clikk sticker is available for a perfect fit
Stokke Steps — not recommended; the Steps tray surface is too heavily textured

Have a different high chair entirely? Brightberry also makes stickers for the Bugaboo Giraffe, Redsbaby Hilo2, and universal shapes (round and rectangular) that can be trimmed to fit.

👉 See the full high chair fit guide here

Frequently Asked Questions

Is the suction sticker reusable? No. It's a single-use adhesive. Once removed, it won't reapply reliably. Replacement stickers are available individually or in packs.

Does a suction sticker work with non-Brightberry tableware? It can work with other brands, but suction performance depends on the design and material of the bowl or plate. We can only guarantee performance with Brightberry tableware.

Will a suction sticker damage my tray? No. The vinyl is designed to remove cleanly without leaving residue or damaging the tray surface. Avoid use on unsealed wood.

Is it safe to serve food directly on the sticker? The sticker materials are safe, but it hasn't been tested for direct food contact. For baby-led weaning or direct serving, we recommend placing the Brightberry Silicone Placemat on top.

Can it go in the dishwasher? No, hand wash only to keep it in good condition.

What's the difference between this and a "suction solver"?
Brightberry is the original — we created this product category. Our sticker is made from a specific high-quality material developed over a year of testing. Here's what one parent had to say:

"I foolishly bought another product from a different company. It lasted only a few weeks and lifted up whenever I tried to remove the suction bowl or toys. I have used one of these for about 3 months now, still looks new. Do not buy any other product claiming to do the same job, they don't work!" — H.W.

👉 Get the Brightberry Suction Sticker for Stokke Tripp Trapp here